Instructions For Authors

Organization of Sections in an Article

Cover Page

Cover page includes (a) complete manuscript title; (b) List of all authors’ full names, highest academic degrees, professional titles, affiliations, and locations of affiliations; (c) Details of the corresponding author – name, address, and e-mail address and (d) sources of support that require acknowledgment, and a running title of not more than 45 characters (including spaces).

Abstract

An abstract is required for all categories of manuscripts. The abstract should not exceed 500 words. The content should not have any subheadings.

For an Research article, the abstract should be divided into four sections: Objective, Methods, Results, and Conclusions not exceeding 500 words.

No abstract should contain any figures, tables, or references, trade names, or manufacturers names.

Keywords

Provide up to five keywords at the end of the abstract for all types of articles except for Letters to the Editor and Replies.

Introduction

All articles need an Introduction that describes the objective of the investigation of not more than 500 words. The author should clearly state the specific goal or purpose of the article, and indicate why it is worthy of attention. In the Introduction, describe the hypothesis to be tested, the dilemma to be resolved, or the deficiency to be remedied.

Materials and Methods or Subject Profile

The research plan, the materials (or subjects), and the methods used should be described. An explanation on how the disease was confirmed and the controls used must be included, as well as the details of the data obtained and how it was analyzed. Methods must include the following aspects:

When a surgical device is mentioned in the manuscript for the first time, its manufactures complete detail should be mentioned such as the BRAND name of the device/medication followed by name of manufacturer, city, and state. For example IVC filter (C.R. Bard, Inc. Murray Hill, New Jersey, USA). Please mention the name of the Ultrasound machine, its manufacturer, and country of origin. In addition please mention the type of the transducer and its frequency used for the study. This should be mentioned in the methods or the section where you describe how the ultrasound was performed. For Example GE, Logiq E9, Milwaukee, USA

Ethics: All research involving humans and animals must obtain ethical approval from the local Institutional Review Board or other appropriate ethics committee before it is conducted and include a statement on ethics committee permission and ethical practices in the ‘Materials and Methods’ section of all original research manuscripts. For more information, visit the Institutional Review Board Approval and Informed Consent section.

Patient consent: Patient anonymity must be maintained in all submissions. If there is any possibility that the patient can be identified in a figure, written consent must be obtained from the patient or parent/guardian by the author, and a line stating that this has been received included in the article.

Study Design

Selection and Description of Participants: Describe your selection of the observational or experimental participants (patients or laboratory animals, including controls) clearly, including eligibility and exclusion criteria and a description of the source population.

Technical information: Identify the methods, apparatus (give the manufacturer’s name and address in parentheses), and procedures in sufficient detail to allow other workers to reproduce the results. Give references to established methods, including statistical methods (see below); provide references and brief descriptions for methods that have been published but are not well known; describe new or substantially modified methods, give reasons for using them, and evaluate their limitations. Identify precisely all drugs and chemicals used, including generic name(s), dose(s), and route(s) of administration.

Reports of randomized clinical trials should present information on all major study elements, including the protocol number and date, assignment of interventions (methods of randomization, concealment of allocation to treatment groups), and the method of masking (blinding), based on the CONSORT Statement.

Statistics

Wherever possible quantify findings and present them with appropriate indicators of measurement error or uncertainty (such as confidence intervals). Authors should report losses to observation (such as dropouts from a clinical trial). When data are summarized in the Result section, specify the statistical methods used to analyze them. Avoid non-technical uses of technical terms in statistics, such as ‘random’ (which implies a randomizing device), ‘normal’, ‘significant’, ‘correlations’, and ‘sample’. Define statistical terms, abbreviations, and most symbols. Specify the software used for analysis. We recommend that authors refer to the relevant regulations of ICMJE: ith access to the original data to judge its appropriateness for the study and verify tDescribe statistical methods with sufficient detail to enable a knowledgeable reader whe reported results. When possible, quantify findings and present them with appropriate indicators of measurement error or uncertainty (e.g., confidence intervals). Avoid relying solely on statistical hypothesis testing, such as P values, which fail to convey important information about effect size and precision of estimates.

Results

All results should be in a clear, logical sequence and should adhere to the specific objective of the paper. Data presented in tables should not be duplicated in the text. However, important trends and points observed in the study will need to be described. While summarizing data, give numeric results not only as derivatives (for example, percentages) but also as the absolute numbers from which the derivatives were calculated; also specify the statistical methods used to analyze them. Restrict tables and figures to those needed to explain the argument of the paper and to assess its support. Use graphs as an alternative to tables with many entries; do not duplicate data in graphs and tables. Where scientifically appropriate, analyses of the data by variables such as age and sex should be included.

Discussion

The article submitted should explain clearly the outcome of the research considering the goals and results obtained. Any limitations on the materials or subjects and methods must be included. The results differing from those obtained by previous investigators need to be presented with adequate comparisons and explanations. Include key findings (primary outcome measures, secondary outcome measures and results as they relate to a prior hypothesis); Strengths and limitations of the study (study question, study design, data collection, analysis and interpretation); Interpretation and implications in the context of the totality of evidence should be described. Include what this study adds to the available evidence, effects on patient care and health policy, etc.

Do not repeat the data or other material mentioned in the Introduction or the Results section. In particular, contributors should avoid making statements on economic benefits and costs unless their manuscript includes economic data and analyses. Avoid claiming priority and alluding to work that has not been completed.

References

References are to be numbered sequentially in the order in which they appear in the manuscript. Reference numbers are typed as superscripts, enclosed by square brackets.

Example: …… with no evidence of intratubular testicular neoplasia.^[1]

Unpublished data or articles submitted for publication are not to be cited in the reference list. They are cited within parenthesis in the text. (Example: Aaron J, unpublished data). Papers presented at meetings are not cited in the reference list. They are cited within parenthesis in the text. (Example: Aaron J et al., presented at the 2009 annual meeting of the Society).

References follow the ICMJE guidelines. Author’s surname is followed by the author’s initials in capitals without spaces or full stops. All references show page numbers in the format (121-26). Refer to the List of Journals Indexed in Index Medicus for abbreviations of journal names, or access the list from here.

Sample references are given below:

Articles in Journals
1. Olson MC, Posniak HV, Fisher SG, Flisak ME, Salomon CG, Flanigan RC, et al. Directed and random biopsies of the prostate: indications based on combined results of transrectal sonography and prostate-specific antigen density determinations. Am J Roentgenol 1994;163:1407–11.

List the first six contributors followed by et al in all references.

2. Rose ME, Huerbin MB, Melick J, Marion DW, Palmer AM, Schiding JK, et al. Regulation of interstitial excitatory amino acid concentrations after cortical contusion injury. Brain Res. 2002;935:40-6.

Issue with supplement
3. Payne DK, Sullivan MD, Massie MJ. Women’s psychological reactions to breast cancer. Semin Oncol 1996;23(1, Suppl 2):89-97.

Volume with supplement
4. Shen HM, Zhang QF. Risk assessment of nickel carcinogenicity and occupational lung cancer. Environ Health Perspect 1994;102 Suppl 1:275-82.

Books and Other Monographs

Personal Author(s):

5. Ringsven MK, Bond D. Gerontology and leadership skills for nurses. 2nd ed. Albany (NY): Delmar Publishers; 1996.

Editor(s), compiler(s) as author:

6. Norman IJ, Redfern SJ, editors. Mental health care for elderly people. New York: Churchill Livingstone; 1996.

Chapter in A Book
7. Turgut AT, Dogra VS. Prostate carcinoma: Evaluation using transrectal sonography. In: Hayat MA, ed. Methods of cancer diagnosis, therapy, and prognosis. 1st ed. New York, NA: Elsevier; 2008. p. 499-520.

Electronic Sources as Reference

Refer APA’s Quick guide on reference for electronic references.

Monograph on the Internet format: Foley KM, Gelband H, editors. Improving palliative care for cancer [monograph on the Internet]. Washington: National Academy Press; 2001 [cited 2002 Jul 9].

Refer Homepage/Web site and Part of a homepage/Web site formats in the hyperlink provided

Tables

Tables must be significant and provide a good summary of the study. Tables should be self-explanatory and not duplicate of the data given in the text or figures. Each table must have a descriptive title, and each column a heading. Tables must contain a minimum of four lines and two columns of data and not exceeding 10 columns and 25 rows. Tables are numbered in the order in which they are cited in the text. Abbreviations used in the tables are defined below each table. All arithmetic calculations (percentages, totals, differences) must be double-checked for accuracy, and data must agree with the data given in the text.

Graphs

Graphs need to be exported as JPEG or TIF images and submitted as figures. Graphs and line drawings need to be a minimum of 1000 dpi. Graphs should include clearly labeled error bars described in the figure legend. Authors must state whether a number that follows the ± sign is a standard error of the mean (SEM) or a standard deviation (SD). The number of independent data points (N) represented in a graph must be indicated in the legend. Numerical axes on graphs should go to 0, except for log axes.

Figure/Image Legends

All figure parts relating to one image should have the same figure number. The figure legendsshould strictly follow the format as the following:
Figure 1: Age and gender of the patient followed by presenting symptoms and subsequent diagnosis. Imaging modality used, organ/section imaged, view, and abnormality seen in the image. It is important to add arrows pointing to the abnormality seen in the image.
Example: Figure 1: 42-year-old woman with Behçet disease who presented with dyspnea. (a) Contrast-enhanced CT image shows the increased diameter of both middle and lower lobe pulmonary arteries (arrows) on the right; the aneurysms are partially thrombosed. (b) CT image with lung window shows well-defined lung parenchymal nodules (arrow) corresponding to the aneurysms.

Written permission to reprint in print and electronic media, including online use, must be obtained for all previously published illustrations, and an appropriate credit line to be given in the legends.

Figures/Images

All images should be uploaded in JPEG or TIFF, format. The file size should be within 12 MB. Figures should be numbered consecutively according to the order in which they have been first cited in the text. Labels, numbers, and symbols should be clear and of uniform size. The lettering for figures should be legible enough even after reducing to fit the width of a printed column. Symbols, arrows, or letters used in photomicrographs should contrast with the background and should be marked neatly with transfer type or by tissue overlay and not by pen. Titles and detailed explanations belong in the legends for figures not on the figure/image themselves. The photographs and figures should be trimmed to remove all the unwanted areas and the patient’s name and medical record number. If photographs of individuals are used, their pictures must be accompanied by written permission to use the photograph and eyes must be covered. If a figure has been published elsewhere, the original source must be acknowledged and written permission from the copyright holder submitted to reproduce the material. A credit line should appear in the legend for such figures. Electronic manipulation of images that materially alters the medical information must be identified and the nature of the alterations described. Symbols used must be uniform in size & style and large enough to withstand reduction. Line drawings and graphs should be in black on a white background, using the same size type as the text. 0.5 mm hairline rules must be avoided. Authors’ names and affiliations must not appear anywhere on the images.

Image Size

Black & white images: should be in JPEG or TIFF format of Grayscale mode, and 300 DPI resolution. The height and width of an image should be at least 6 x 5 inches.

Color images: should be in 300 DPI resolution without any layered files and alpha channels. Color profile if used should be in CMYK (No Indexed Color, Lab, or RGB profiles) only.

Line art: should be in 1200 DPI resolution of Grayscale or JPEG format. Layered files and alpha channels should not be used. Color profile if used should be in CMYK (No Indexed Color, Lab, or RGB profiles) only. The Journal reserves the right to crop, rotate, reduce, or enlarge the photographs to an acceptable size.

Video Clips

The journal encourages authors to submit video clips, cine clips, or real-time images (preferably in ‘mp4’). The maximum size of each multimedia file should not exceed 400 MB. In addition to the video content, authors must provide a still image from each video file. Provide only TIFF or JPEG files.